Water Well Tips - from a homeowner
Adjusting Your Water Well Pressure Gauge needs to be mounted vertically to prevent water intrusion. If it gets very cold and water freezes inside the gauge, the Bourdon tube will be damaged. This can cause it to add an extra 30 psi to all readings, which is confusing. Having the gauge upright is better to read and keeps the water out. Oh yeah, if it freezes, it's best if the plumbing is insulated with pipe wrap, or the like. I learned these lessons the hard way. Well Cap should not be loose. The cap is a sandwich of steel plates with a rubber seal that gets squished and becomes wider, sealing itself in the well tube. It is possible for the cap on a new installation to become loose after the rubber forms to its new shape and takes a set. The fasteners on top (4 nuts on mine) should be evenly tightened. Don't over-tighten it, think valve cover gasket, not lug nuts. Bladder Tank Pre-charge needs to be set correctly. Properly pressurized bladder tank is adjusted to 2 psi bel...